Gea Replacement Heat exchanger plates&gaskets
GEA replacement gasket and plate
Heat Exchanger Gasket
Product Description
Sealing gasket is inserted and fixed to the slot in heat-exchanging sheet, featuring easy insertion and replacement of sealing gasket, which can substantially reduce stoppage time.
Sealing function is separated from fixing function. Even if some “clamps” with fixing function fail, the gasket can still have sealing function in the slot.
After many times of dismounting, small permanent deformation of the gasket.
Adopting the raw materials of sealing gaskets are imported primary gum, performance indexes have reached international standard.
Material of Heat Exchanger Gasket
Material |
Code |
Applicable |
Anti-corrosive Performance and Applicable Occasions |
NBR |
N |
-20~110 |
Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc. |
EPDM |
E |
-50~150 |
Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc. |
CR |
C |
-40~100 |
Ammonia, mineral oil and lubricant, etc. |
Fluorine Rubber |
F |
0~180 |
Inorganic acid, alkali, mineral oil and Haloalkane, etc. |
Silicon Rubber |
Q |
-65~230 |
Resistant to cold current and dry hot |
Features of Heat Exchanger Gasket
1 .The unique-structure shunting area can balance fluid distribution.
2.The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition.
3. Fillets in the sheet are of “Interlocked” structure which allows for mutual interlocking of sheets.
Principle for Plate and Gasket
Plate Material :
Stainless steel 304# , stainless steel 316, stainless steel 316L# ,
SMO254 , Titanium , Nickel , Alloy .
Plate Thickness :
0.24 in (0.6mm) , 031 in (0.8mm) and .039 in (1mm), 0.5mm