Guangdong Jiema Energy Saving Technology Co.,Ltd

Review
  • “high quality Storage Tank For Water Heater , fast shipping and delivery, I recommend the seller and his shop.”
    Artur Olszak
    3D TRANSPORT GMBH
  • “The company comply with the contract strict, a very reputable manufacturers, and the Storage Tank For Water Heater I purchased is just as same as the description.worthy a long-term cooperation.”
    Ms. Tracy
    3dmatsindia
  • “We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!And I will also recommend your company's Storage Tank For Water Heater to my friends who need this.”
    Deshawn Darnell
    tmc fluid systems
  • “This Storage Tank For Water Heater price, for my company, is a littile high, but its return shows the value.”
    Yasmen Drake
    JWHulme
  • “No problems with shipping or delivery on this one either.”
    Bob Groeneweg
    agri-steel buildings

Storage Tank For Water Heater

- manufacturer, factory, supplier from China

(Total 11 Products for Storage Tank For Water Heater)

  • Shell and Coil Condenser for Water Cooling Heating

    Shell and Coil Condenser for Water Cooling Heating

    • Brand: Jiema
    • Packaging: Plywood box
    • Supply Ability: 1000 pcs per month
    • Min. Order: 1 Piece/Pieces

    Shell and Coil Condenser for Water Cooling/Heating Jiema Shell and Coil Condenser for Water Cooling/Heating, aka Storage Tank for Water Heater or Shell and Coil Evaporator, is one of the most newest and advanced types of High Efficiency Heat Exchanger. With water or saturated steam at a high temperature as the heating...

    Contact Now

  • Semi Volumetric Heat Exchanger

    Semi Volumetric Heat Exchanger

    • Brand: JIEMA
    • Packaging: plywood
    • Supply Ability: 10000000 sets
    • Min. Order: 1 Set/Sets

    Introduction Semi-volumetric heat exchanger with built-in heater, its main principle is to improve the heat transfer efficiency and heat supply by increasing the flow rate of the heat medium inside the tube and the heated water outside the tube, changing the laminar flow for turbulent heat exchange, giving full play...

    Contact Now

  • Water Storage Tank with Heat Exchanger

    Water Storage Tank with Heat Exchanger

    • Brand: Jiema
    • Packaging: Plywood Box
    • Supply Ability: 100 pcs per month
    • Min. Order: 1 Set/Sets

    Water Storage Tank with Plate Heat Exchanger is considered a suitable choice for schools, hotels, hospitals, and many more where large demand of hot water is in need. By introducing the shell coil type heat exchanger into the system, we heat up the water to desirable temperature and keep it warm inside the storage...

    Contact Now

  • Storage Tank Water Heater

    Storage Tank Water Heater

    • Brand: Jiema
    • Packaging: Wooden Box
    • Supply Ability: 300 Sets/Month
    • Min. Order: 1 Set/Sets

    Product Description Pressure Vessels Our company introduces you a new product - hot water tank. This product is designed specifically for those who value comfort and convenience in their home or office. The hot water tank is highly efficient and reliable, allowing you to always have hot water on hand for any need. The...

    Contact Now

  • Welded Copper Brazed Plate Heater in Industry

    Welded Copper Brazed Plate Heater in Industry

    • Brand: Jiema
    • Packaging: Plywood box
    • Supply Ability: 1000 pcs per month
    • Min. Order: 1 Piece/Pieces

    Welded Copper Brazed Plate Heater in Industry Jiema Welded Plate Heat Exchanger Stainless steel belongs to the wall heat exchanger. Cold and hot fluids through the plate wall heat exchanger heat transfer operation process, is common and commonly used heat exchanger, cold and hot fluids are fluids, can be air, flue...

    Contact Now

  • Air Plate Heat Exchanger for Flue Gas Recovery

    Air Plate Heat Exchanger for Flue Gas Recovery

    • Brand: Jiema
    • Packaging: Plywood box
    • Supply Ability: 1000 pcs per month
    • Min. Order: 1 Piece/Pieces

    In a world where every penny matters and green solution is emphasized, we all try our best to save up every last bit of energy as much as possible. Waste heat is no exception. Air-Air Heat Exchanger is for heat exchange between high temperature gases with large volume, which fits perfectly for the waste heat...

    Contact Now

  • Air Type Heater for Combustion Air Preheat Coil

    Air Type Heater for Combustion Air Preheat Coil

    • Brand: Jiema
    • Packaging: Plywood box
    • Supply Ability: 1000 pcs per month
    • Min. Order: 1 Piece/Pieces

    Flue gas and combustion air heat exchange is a solution where we recommend customer to choose our Air to Air Type Heater. Our designs are all based on customer’s request and see here for some site photos.

    Contact Now

  • Shell Tube Heat Exchanger for Steam Water Heater

    Shell Tube Heat Exchanger for Steam Water Heater

    • Brand: Jiema
    • Packaging: Plywood box
    • Supply Ability: 1000 pcs per month
    • Min. Order: 1 Piece/Pieces

    In a central heating system, heat source is always a problem haunting many. And today we are introducing one of the ways, which is to steam heating cold water to desirable temperature with our shell and tube heat exchanger. Material Selection Carbon Steel Q235-B, Stainless Steel 304, Copper Specification As per design...

    Contact Now

  • Vertical Volume Heat Exchanger Heater

    Vertical Volume Heat Exchanger Heater

    • Brand: JIEMA
    • Packaging: plywood
    • Supply Ability: 10000000 sets
    • Min. Order: 1 Set/Sets

    Product advantages of volumetric heat exchanger (taking heating as an example) 1、High heat utilization of steam, in addition to heat loss of the equipment itself after insulation, can be fully utilized. 2, There is a very high adaptability of pressure, steam supply pressure between 0.01 ~ 0.8MPa, and no vibration, no...

    Contact Now

  • Gas Heat Recovery Heat Exchanger

    Gas Heat Recovery Heat Exchanger

    • Brand: JIEMA
    • Packaging: plywood
    • Supply Ability: 1000000 sets
    • Min. Order: 1 Set/Sets

    Application Case--A company's heating equipment renovation project The project has a construction area of 1.56 million square meters, and four 29 MW gas-fired hot water boilers are installed. The heat network return water temperature is 45~50℃ and the water supply temperature is 75~100℃. A high-efficiency flue gas air...

    Contact Now

  • Shell and Tube Heat Exchanger Cooler

    Shell and Tube Heat Exchanger Cooler

    • Brand: JIEMA
    • Packaging: plywood
    • Supply Ability: 1000 units
    • Certificate: ISO

    The technological transformation project of 150,000 tons/year of natural color pulp is implemented in the industrial zone of the industrial park. Project status Extension of the material preparation system (new raw material processing capacity of 596,000 t/a), new pulp workshop (establishment of a production line of...

    Contact Now

  • Video
  • Storage Tank Water Heater
  • Welded Copper Brazed Plate Heater in Industry
  • Air Plate Heat Exchanger for Flue Gas Recovery
  • Air Type Heater for Combustion Air Preheat Coil
  • Shell Tube Heat Exchanger for Steam Water Heater
  • Shell and Tube Heat Exchanger Cooler
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Storage Tank For Water Heater

Send Inquiry

Tel:+86-020-82453507

Fax:

Mobile Phone:+8613662249479Contact me with Whatsapp

Email:jmheatexchanger@163.com

Address:No.73, Bigang Road, Nangang Street, Huangpu District, , Guangzhou, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send