Guangdong Jiema Energy Saving Technology Co.,Ltd

News

Home > News > HEAT EXCHANGERS TO SLUDGE TREATMENT

HEAT EXCHANGERS TO SLUDGE TREATMENT

2020-05-06


Current total sewage treatment capacity in China is estimated to be about 200 million tons/day, and the rough calculation of the amount of wet sludge produced is about 200,000 tons/day, which is an astonishing output. However, due to the long-term "heavy water but light mud" situation in the industry, about 30 million tons of the large amount of sludge produced every year has not been properly disposed. The situation is not optimistic. Sludge disposal has become an important bottleneck restricting the healthy development of sewage treatment plants.

Jiema Heat Exchanger


Air To Air Heat Exchanger, also known as Welded Plate Heat Exchanger or plate Air Heat Exchanger, is a new type of Plate Heat Exchanger developed by Jiema. And the corresponding patent has been obtained. It is composed of a series of thin metal plates that are parallel to each other and pressed with spaced columns.


Sludge Treatment Waste Gas Heat Exchanger2


One of our customer`s sludge drying and incineration project applies our wide-channel plate heat exchanger (1219*4820mm), specifically for waste heat recovery during sludge drying and incineration. The heat energy of the high-temperature waste gas discharged after incineration is heated through a gas-to-gas plate heat exchanger to heat clean air at room temperature. First, the system intends to reduce the moisture in the sludge, which is more conducive to combustion; second, it makes combustion more complete and improves efficiency.


Sludge Treatment Waste Gas Heat Exchanger3Sludge Treatment Waste Gas Heat Exchanger4Sludge Treatment Waste Gas Heat Exchanger5


Conventional plates generally use herringbone corrugations, and there are grid-type contact points between the plates. These points can easily wear through the plates under the erosion of solid particles, causing perforation and leakage, and the two fluids will mix. Together, they bring great losses to production. The wide flow channel designed in this project is a thin metal plate with spaced columns. There are less contact points between the plates, and solid particles can pass smoothly through the channel, which is not easy to block and can greatly reduce the number of maintenance and cleaning of the heat exchanger. At the same time, service life of the equipment extends and investment in equipment and labor reduces.



Send Inquiry

Tel:+86-020-82453507

Fax:

Mobile Phone:+8613662249479Contact me with Whatsapp

Email:jmheatexchanger@163.com

Address:No.73, Bigang Road, Nangang Street, Huangpu District, , Guangzhou, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send