Materials selection for Jiema Dry Cooling Tower for Water Chiller System
Fillers/Packing Materials for Jiema Dry Cooling Tower&Hybrid Cooling Tower
1)PVC(Polyvinyl Chloride) For situation where the temperature of water is low than 45℃
2)PP(Polypropylene) For situation where 45℃-100℃ is the temperature of water
Shell/Frame Materials for Jiema Closed Circuit Cooling Tower
1)Stainless steel
Anti-corrosion and very clean with long service time(ten years usually)
2)FRP OR GFRP(Glass Fiber Reinforced Plastic)
Wide range of applications, light weight and not likely to be corroded but with short service time and need to be maintained and replaced on a regular basis.
Consideration for Choosing a Perfect Cooling Tower
Circulating flow of water
This would largely decide the size of the Cross Flow Cooling Tower
Types of Cooling Tower
As it is listed here, Jiema Dry Cooling Tower, Hybrid Cooling Tower, Closed Circuit Cooling Tower are only a small collection under the grand categorization of Cooling Tower. Therefore, the type of Cooling Tower is also of great significance. For instance, Closed Type is to be used if there is strict requirements for water quality, and the dust content is also higher.
Design temperature
Temperature for both water inlet and outlet
Location of actual use
As we are using air as the coolant, local humidity and temperature would also affect the overall performance and efficiency of our Hybrid Cooling Tower and Closed Circuit Cooling Tower.
FAQ
1.Why do you call a Cooling Tower a Condenser?
It can be viewed as a condenser in terms of its function.
2.What are the cooling tower parts?
Inside the cooling tower, we have a drive train for guiding the air direction, a water distributing system as a way to splash water evenly on the tower surface, fillers that would make the water drop linger for seconds in a bid to improve heat exchanging effect, and above all, a main shell to protect the equipment.
Contact Now
