Longitudinal Finned Tube& Fin Pipe

Call it Longitudinal Finned Tube, Fin Pipe, Fin Tube Products or whatever you want. They are multiple U-Shaped Fins, equal length to the Tube, Welded on the surface of the Heating Exchanging Tubes. See the picture of our Longitudinal Finned Tube. Fins are all resistance welded firmly, so don’t you worry about loose connections.

Similarities of high efficiency, economic floor space and light weight also make perfect sense for our Longitudinal Finned Tube. But what makes it so special, you may ponder? Changing the air flowing direction from Cross Current to Longitudinal Current, our engineers bring Fin Pipe or Fin Tube Products to another applicable usage, which is to reduce the friction caused by Cross Flow and increase the overall efficiency by 5-10 percent. From other perspectives, Jiema Longitudinal Finned Tube will also minimize the possibility of charring or scaling. Even if slight/loose charring is found on the Fin Surface, we are able to remove them with running water or flowing steam.

Features of Our Fin Pipe&Fin Tube Products

1.They enhance the heat transfer efficiency well within the effective space;

2.Will reduce the installation space but meanwhile realize required heat transfer surface;

3.At the same time, all the products manufactured by Jiema are of high reliability;

4.The pressure drop on the tube side is minimized and the operation cost is reduced;

5.Overall performance of steel pipe are modified;

                                                                    6.Heat transfer is strengthened to reduce resistance.

Customers’ Impression on Jiema

     Negotiable Manufacturer with Patience                                                                                                     Responsive Service Provider

                                                     Huge Factory Well-Equipped with Advanced Machinery

Things That You May Care About

1.Which type of Longitudinal Finned Tube is most efficient?

The Thinner the Fin Thickness Is Required to Be, the Better the Efficiency Will Be. But the minimal Fin Pitch will be 11Fins Per Inch. If any thinner, the fin might be of perforation under high temperature.

2.Do you take charge of the installation of my Fin Pipe or Fin Tube Products?

We don't install fin tubes if our customers are only buying the tubes in bundles. Fin tubes, relatively speaking, are of easy assembly. But we do complete the installation of the whole unit such as Air Heat Exchanger and Radiator if needed.